4Xx Error Messages (400-499.99) - Lexmark MS81x Service Manual

Action
Step 6
Remove all other options and install only the HCIT option.
Does the error remain?
Step 7
Check the interface cable of the printer or upper level option for damage.
Is the above component still ok?
Step 8
Check the connectors on the controller board. If damaged, then replace
the controller board. See "HCIT controller PCBA removal" on page
Reseat all connectors on the controller board, then POR the machine.
Does the error remain?
Step 9
Replace the tray.
Does the error remain?
Step 10
Replace the drawer.
Does the error remain?
4xx error messages (400‑499.99)
Error code Description
400.XX Invalid parameters during output option paper jam
411.01 Media remains detected by the output option
1/output expander sensor (pass through) after power
on.
411.03 The media fed did not reach the output option
1/output expander sensor (pass through).
411.05 The media while feeding remains detected by the
output option 1/output expander sensor (pass
through).
411.09 Never received Page In Output from output option
1/output expander
411.10 Invalid Page ID returned by output option 1/output
expander
Yes
Go to step 8
Go to step 8.
Replace the controller
board. Go to
controller PCBA
433.
removal" on page
433.
If the error remains,
then go to step 9.
Go to step 10.
Contact the next level
of support.
Action
1
Reseat all the installed output options on the
printer.
2
Open the rear door and clear obstructions along
the paper path.
3
Make sure that the sensors (pass through) are
free from obstructions.
If the problem remains, then go to
expander jam service check" on page
Diagnostic information
161
No
Go to step 7.
Replace the interface
cable of the printer or
upper level option.
The problem is solved.
"HCIT
The problem is solved.
The problem is solved.
"Output
191.
4063