Sensor (Toner Density) Removal - Lexmark MS81x Service Manual

Sensor (toner density) removal

1
Remove the left cover. See
2
Remove the controller board access shield. See
3
Remove the media tray. See
4
Remove the front door. See
5
Remove the toner cartridge.
6
Remove the imaging unit.
7
Remove the MPF feeder lift plate. See
8
Remove the media turn guide. See
9
Remove the media vertical guide. See
10
Remove the duplex exit diverter. See
11
Remove the inner guide deflector. See
12
Remove the media aligner roller. See
13
Remove the screw (A) securing the sensor (toner density) to the machine.
14
Gently lift and remove the sensor (toner density).
"Left cover removal" on page
"Controller board access shield removal" on page
"Media tray removal" on page
"Front door removal" on page
"MPF feeder lift plate removal" on page
"Media turn guide removal" on page
"Media vertical guide removal" on page
"Duplex exit diverter removal" on page
"Inner guide deflector removal" on page
"Media aligner roller removal" on page
Repair information
312
277.
339.
288.
302.
299.
300.
286.
289.
297.
4063
351.