Stapler Service Cover Removal; Stapler Controller Card Removal; Stapler Left Tamper Motor Removal - Lexmark MX61 Series Service Manual

Stapler service cover removal

1
Remove the two screws (A) from the cover.
2
Press the latches (B) to release, and pull the service cover off the stapler.

Stapler controller card removal

1
Remove the stapler service cover. See
2
Disconnect all the cables from the controller card.
3
Remove the five screws (A), then pull the controller card off the stapler.

Stapler left tamper motor removal

1
Remove the stapler service cover. See
2
Disconnect the motor cable (A).
"Stapler service cover removal" on page
"Stapler service cover removal" on page
Repair information
397
7016
397.
397.