Sensor (Hcoe Media Bin Full) With Flag Removal; Hcoe Right Outer Cover Removal - Lexmark MS81x Service Manual

Sensor (HCOE media bin full) with flag removal

1
Remove the sensor cover. See
2
Remove the two screws (A) securing the sensor brace.
3
Disconnect the cable (B), and remove the sensor (media bin full) with flag.

HCOE right outer cover removal

1
Open the rear door, then detach the string (A) from the rear door.
Note: Fasten the string to the rear side to prevent it from recoiling into the interior of the HCOE.
"HCOE sensor cover removal" on page
Repair information
463
462.
4063