Service menus
•
"Using the printer control panel" on page 223
•
"Menus list" on page 224
•
"Diagnostics menu" on page 224
•
"Configuration menu" on page 242
•
"Entering invalid engine mode" on page 252
•
"Entering recovery mode" on page 252
•
"Accessing the Network SE menu" on page 253
•
"Service Engineer menu" on page 253
Using the printer control panel
Use the
1
Display
2
Select button
3
Arrow buttons
4
Keypad
5
Sleep button
6
Stop or Cancel button Stop all printer activity.
7
Back button
To
•
View the printer status.
•
Set up and operate the printer.
Submit changes made in the printer settings.
Scroll up and down or left and right.
Enter numbers, letters, or symbols.
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
•
Press any hard button.
•
Pull out Tray 1 or load paper in the multipurpose feeder.
•
Open a door or cover.
•
Send a print job from the computer.
•
Perform a power‑on reset with the main power switch.
•
Attach a device to the USB port on the printer.
Return to the previous screen.
Service menus
223
4063