Base Printer- Front Removals; Duplex Exit Diverter Removal - Lexmark MS81x Service Manual

4
Slide the rear door away from the machine, and remove it.

Base printer- front removals

• "Duplex exit diverter removal" on page 286
•
"Front door removal" on page 288
•
"Inner guide deflector removal" on page 289
• "Laser printhead removal" on page 291
•
"Left inner cover removal" on page 295
•
"Media aligner roller removal" on page 297
• "Media turn guide removal" on page 299
•
"Media vertical guide removal" on page 300
•
"MPF feeder lift plate removal" on page 302
• "MPF pick roller removal" on page 305
•
"MPF tray removal" on page 308
•
"Right inner cover removal" on page 309
• "Sensor (input) removal" on page 310
•
"Sensor (toner density) removal" on page 312
•
"Transfer roller left arm with cable removal" on page 313
• "Transfer roller right arm removal" on page 314
•
"Transfer roller removal" on page 317

Duplex exit diverter removal

1
Remove the left cover. See
2
Remove the controller board access shield. See
"Left cover removal" on page
"Controller board access shield removal" on page
Repair information
286
277.
4063
351.