Printed Page Count; Permanent Page Count (Perm; Processor Id - Lexmark MS81x Service Manual

This setting is used by the printer to determine whether US or non-US factory default values should be used. The
following printer settings have different US and non-US values:
Printer default values
Paper Sizes setting in the General Settings menu
Default Paper Size (paper feeding sources which do not
have hardware size sensing capabilities)
Default Envelope Size (envelope feeding sources which do
not have hardware size sensing capability)
Fax media size
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
To change this setting:
1
From the Diagnostics menu, navigate to:
Printer Setup > Defaults
2
Choose U.S. or Non‑U.S.
3
Do one of the following:
•
Depending on the printer model, press OK or touch
•
Press X to return to the Printer setup menu.

Printed Page Count

The value of this setting gauges the amount of usage on the printer. The value of the Printed Page Count setting will
equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset to zero.
To view the page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Printed Page Count.
Note: The value of the setting cannot be changed manually.
Permanent Page Count (Perm page count)
The value of this setting indicates the total amount of pages that have been printed. After all print tests have been
completed, the value will reset to zero.
To view the permanent page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Perm Page Count.
Note: The Permanent Page Count value cannot be reset.

Processor ID

The value of this setting indicates the ID of the processor on the controller card within the printer.
To view the Processor ID:
US value
U.S.
Letter
10 Envelope
Letter
PC-8
437
Inches
to save any changes.
Service menus
237
Non-US value
Metric
A4
DL Envelope
A4
PC-850
850
Millimeters
4063