5
Disconnect the cable (B), and remove the sensor.
6
Flex the brace to release, then remove the flag.
Sensor (pick roll position) removal
1
Remove the HCIT. See
2
Remove the drawer assembly rear cover. See
3
Remove the drawer assembly left cover. See
4
Remove the top cover assembly. See
"HCIT removal" on page
423.
"HCIT drawer assembly rear cover removal" on page
"HCIT drawer assembly left cover removal" on page
"HCIT top cover assembly removal" on page
Repair information
440
428.
429.
434.
4063