Lexmark MS81x Service Manual page 125

Error code Description
341.51 No encoder feedback detected from the tray 4
pick/lift motor.
341.52 Motor stop error—the tray 4 pick/lift motor kept on
running some time after the motor was commanded
to stop.
341.53 The tray 4 pick/lift motor went over the normal speed
342.54 No encoder feedback detected from the tray 4
transport motor.
342.55 Motor stop error—the tray 4 transport motor kept on
running some time after the motor was commanded
to stop.
342.56 The tray 4 transport motor went over the normal
speed.
344.57 No encoder feedback detected from the tray 4 (HCIT)
lift motor.
344.58 Motor stop error—the tray 4 (HCIT) lift motor kept on
running some time after the motor was commanded
to stop.
344.59 The tray 4 (HCIT) lift motor went over the normal
speed
345.60 Hardware Error—tray 4 board ID unknown
345.61 Hardware Error—tray 4 option type unknown
345.62 Hardware Error—tray 4 product ID unknown
345.63 Hardware Error—tray 4 sensors are not plugged on
the board
345.64 Hardware Error—tray 4 lift plate failed to reach its
home position
Action
Go to "250/550-sheet media feeder failure service
check" on page
Open the media tray, and make sure to remove all
obstructions.
If this doesn't solve the issue, then go to
sheet transport motor failure service check" on
page 128
Go to "HCIT lift drive motor failure service check"
on page
Go to "250/550-sheet controller board failure
service check" on page
Go to "HCIT lift plate failure service check" on
page 135.
Diagnostic information
125
130.
133.
132.
4063
"250/550-