7
Remove the MPF feeder lift plate. See
8
Gently slide the media turn guide to the right to detach it from the machine.
9
Remove the media turn guide.
Installation note: When replacing the media turn guide, ensure that the alignment pin properly engages the
media turn guide and that the alignment hooks properly engage the slots in the frame. If these parts are not
properly engaged, paper jams will occur.
Media vertical guide removal
1
Remove the left cover. See
2
Remove the controller board access shield. See
3
Remove the media tray. See
"MPF feeder lift plate removal" on page
"Left cover removal" on page
"Controller board access shield removal" on page
"Media tray removal" on page
Repair information
300
302.
277.
339.
4063
351.