4
Disconnect the cable (C) from the controller board, and remove the main cooling fan.
Main drive motor removal
1
Remove the imaging unit from the machine.
2
Remove the right cover. See
3
Remove the rear lower cover. See
4
Remove the LVPS. See
5
Remove the left cover. See
6
Remove the PCBA housing. See
7
Remove the harnesses from the clamp (A).
"Right cover removal" on page
"Rear lower cover removal" on page
"LVPS removal" on page
"Left cover removal" on page
"PCBA housing removal" on page
Repair information
283.
280.
366.
277.
357.
354
4063