Hcit Incorrect Media Error Service Check - Lexmark MS81x Service Manual

Machine type 4063-2xx, -4x0, -63x, -83x
Hide thumbs Also See for MS81x:
Table of Contents

Advertisement

Action
Step 6
If the 250/550-sheet tray option is the only input option installed, then
replace the 250/550-sheet tray option. See
and drawer assembly removal" on page
If there are multiple input options, then remove the suspected input
option and install it as Tray 2. Run a print test, navigate to: Reports >
Device Statistics
Does the error remain?

HCIT incorrect media error service check

Action
Step 1
Remove the media tray from the HCIT option and do the following:
Remove all media and check the paper guides for damage. Move the
paper guide and verify if it can move freely from one position to
another.
Check the media size finger flag for damage.
Check the elevator plate. Manually lower down the elevator plate and
check if it springs back to its original position.
Check the elevator tension cables if there are problems.
Check the elevator gears for damage.
Manually turn the drive gear and check if the other gears engaged to
it will also turn.
Check if the tray can be inserted properly into the HCIT option.
Are the above components ok?
Step 2
Remove the media tray from the HCIT option and do the following:
Check if there is no problem moving the tray input guides.
Manually push the media size sensor flags and check if it would spring
back to its original position.
Check the sensor (HCIT media guide) for damage. Make sure all
obstructions are removed.
Are the above components ok?
Step 3
Check the HCIT media guide for damage. Check if the spring of the media
guide functions properly when the guide is released.
Is the above component ok?
"250/550-sheet media tray
406.
Diagnostic information
202
Yes
No
Replace the input tray
The problem is solved.
option. Go to
"250/550-sheet media
tray and drawer
assembly removal" on
page
406.
Yes
No
Go to step 2.
Replace the media tray.
Go to
on page
Go to step 3.
Replace the HCIT
drawer assembly. Go to
"HCIT drawer
assembly removal" on
page
Go to step 4.
Replace the HCIT media
guide. Go to
media guide removal"
on page
4063
"HCIT removal"
423.
423.
"HCIT
424.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms71x

Table of Contents