Output Expander Error Service Check - Lexmark MS81x Service Manual

Machine type 4063-2xx, -4x0, -63x, -83x
Hide thumbs Also See for MS81x:
Table of Contents

Advertisement

Output expander error service check

Action
Step 1
Is the output expander the only output option installed?
Step 2
Remove all output options and re-install only the expander.
Enter Diagnostics Menu and navigate to:
Output bin tests > Feed Tests >Output Bin 1
Select Single.
Does the output option feed normally?
Step 3
Check the auto connector end of the option previously installed below the
expander.
Is it free of damage?
Step 4
Check the upper interface cable. If damaged, then replace the upper
interface cable. Go to
"Upper interface cable removal" on page
Remove the left cover. Reseat the upper interface cable on the controller
PCBA, then POR the machine.
Does the error remain?
Step 5
Open the left cover, reseat all connectors on the controller PCBA. POR the
machine and perform a Print test.
Does the error remain?
Yes
Go to step 4.
The problem may not
be on this option tray.
Re‑install the
remaining output
options one at a time
and test each option
for errors. Proceed
with the appropriate
service check based on
the error message and
the output option
being tested.
Go to step 4.
Go to step 5.
456.
Replace the controller
PCBA. Go to
expander controller
PCBA removal" on
page
If the error persists,
then replace the
output expander. Go to
"Output expander
assembly removal" on
page
Diagnostic information
221
No
Go to step 2.
Go to step 3.
Replace the upper
interface cable of the
output option
previously installed
under the expander.
The problem is solved.
The problem is solved.
"Output
454.
446.
4063

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms71x

Table of Contents