Main Tab - LXE MX7 Tecton CE Reference Manual

Main Tab

Main Tab
Start | Settings | Control Panel | Data Collection | Main tab
The parameters shown on these panels are only those that apply to the specific mobile device.
Device with Symbol Scanner
Note: The Scan Mode (Continuous Scan) section is only present if the MX7 Tecton has a Symbol integrated scanner.
Parameter
Device 1,2,3
Keep Awake
Scan Mode
Send Key Messages
(WEDGE)
Function
1 - Default is Disabled
2 - Default is Internal
3 - Default is Disabled
The data collection device (laser scanner, laser imager, internal, external, or wireless).
Default is Disabled.
Default is Disabled. This box is only shown when the internal scanner is a Symbol scanner. See
Continuous Scan Mode below for an explanation.
Default: Enabled.
When Send Key Messages (WEDGE) is checked any data collection scan is converted to
keystrokes and sent to the active window. When this checkbox is not checked, the application will
need to use the set of LXE Scanner APIs to retrieve the data from the scanner driver. Note that this
latter method is significantly faster than using Wedge.
E-EQ-MX7CERG-A [ 121 ] MX7 Tecton™ CE Reference Guide
Device with HHP Imager