Setting Up Single-Original Program; Automatic Sorting Into Groups - Riso RP3700I User Manual

Automatic Sorting into Groups

Setting Up Single-Original Program

Display the [Program] tab on the
1
sub-panel window and then touch
the [Register] button.
A message stating [Select a Register Frame for a
Program] appears.
• Only the Register Frame buttons which are not
occupied with program settings can be selected.
• If no vacant Register Frame button is displayed
on the window, scroll through the list by
touching the [ h ] or [ j ] button.
Touch a vacant Register Frame
2
button.
The program type selection window appears.
NOTE
Touch the [Single Page Mode]
3
button.
The [Single Page Mode] window appears.
132
Up to 12 program settings can be
registered in total.
Delete unwanted programs when the
memory is full.
p.139... Erasing a Saved Program
Setting
Ready to Make Master
Select a Register Frame for a Program
Retrieve P-1
Register P-2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
Ready to Make Master
Select a Register Frame for a Program
Retrieve P-1
Register P–2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
Select the Type of Program
to be Registered
Select a Register Frame for a Program
Program Type
P–1
P–2
Single Page Mode
P–3
Multi-Page Mode
Selections Programme
A3/Black
Idle
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
Cancel
P.1/4
Catalog
13:59