Riso RP3700I User Manual page 70

Repositioning the Print
Horizontal Print Position Shift
[Recall] button
Recovers the print position specified for the previous
page (original) position.
Important!
The memorized print position data will be erased after the main power switch is turned off
or the Reset key is pressed, preventing the recovery of the print position specified for the
previous original.
The position of the original image can also be adjusted at the time of master-making.
NOTE
p.106... Skipping the Registration Mark
p.108... Adjusting the Side Margins
70
10. 0mm 10. 0mm
Fine
[Fine] button
Changes the per-step shift distance to half of the
standard rate (to 0.25mm (approx.
To cancel this mode, touch this button again.
Vertical Print Position Shift
Repositioned Print Position Image
Initial position
⁄ ")).
1
72