Riso RP3700I User Manual page 182

Advisory Messages
D00-000: Check Settings
Message
Close Disposal Top Cover
Close Feed Joint Passage Cover
Close Front Cover
Close Master Making Unit
Close Scanner Table
Install Ink Cartridge
Master Not Set in Place
Insert Lead Edge of Master into Master
Entrance and Close Master Making Unit
Set Master Disposal Box in Place
Set Print Cylinder (Drum) in Place
Wrong-Type Ink Cartridge
Installed
Wrong-Type Print Cylinder (Drum)
Installed
182
Description
The Master Disposal Unit is
not correctly closed.
The Feed Joint Passage
Cover is not correctly closed.
The Front Cover is not
correctly closed.
The Master Making Unit is
open.
The Scanner Table is not
correctly closed.
The ink cartridge is not
correctly set.
The master is not set
correctly.
The Master Disposal Box is
not correctly set.
The Print Cylinder (Drum) is
not correctly set.
This type of ink cartridge is
not acceptable for this
machine.
This type of Print Cylinder
(Drum) is not acceptable for
this machine.
Action
Open the Scanner Table and close the
Master Disposal Unit securely.
Open the Front Cover and close the
Feed Joint Passage Cover securely.
Close the Front Cover tightly, pressing
on the lower right-hand area.
Open the Scanner Table and close the
Master Making Unit securely.
Close the Scanner Table tightly,
holding it down.
Set the ink cartridge in place correctly.
p.165... Replacing the Ink Cartridge
Install a master roll, if required, and
insert the lead edge into the Master
Entrance. Then close the Master
Making Unit.
p.167... Replacing the Master Roll
Insert the Master Disposal Box
completely, holding the handle.
p.170... Emptying the Master
Disposal Box
Slide it into place, holding the handle.
p.171... Changing Print Cylinders
(Drums)
Insert a correct type. If you do not
know what ink cartridge is the correct
type, contact your service
representative.
p.165... Replacing the Ink Cartridge
Install a correct Print Cylinder (Drum).
If you do not know what Print Cylinder
(Drum) is the correct one, contact your
service representative.
p.171... Changing Print Cylinders
(Drums)