Changing Process Flow On The Printer; Setting Up Auto Process - Riso RP3700I User Manual

C
hanging Process Flow
on the Printer
Although the Process flow in the Data mode is usually specified with the printer driver, the
setting can also be changed on the printer if the [Full Auto] process is not selected at the
time of data transmission.
Refer to page 36 for further information on the configurable settings during the respective
pauses.
p.36... Auto Process Function
Important!
Select [Manual] for the process flow with the printer driver when you want to change the
process flow on the printer.
Refer to the dedicated user's guide for the printer driver for details on making the
NOTE
settings with the printer driver.

Setting up Auto Process

Touch the [AUTO-GO] button on the
Main-panel window.
Each time you touch the button, the status of the function
is switched between [ON] and [OFF] .
AUTO-GO>OFF
For further details on the Auto-process, refer to
NOTE
the chapter [Automatic Printing (Auto Process)] on
page 71.
114
AUTO-GO>ON
Ready to Make Master
Local Page No. 1
˚Document 1
Owner RISO
Page Count 10Page
Receipt Time 09/31/00 15:30
Page Size A 4 (210X297)
Skip Page Clear All
SORTER>OFF
A3/Black
Idle
Main-panel
AUTO-GO
Sub-panel
Catalog
M
Paper
A 4
Standard
AUTO-GO>ON
13:59