Renaming/Changing A Saved Program Setting - Riso RP3700I User Manual

Renaming/Changing a Saved Program Setting

Display the [Program] tab on the
1
sub-panel window and then touch
the [Change] button.
A message [Select a Program to be Changed]
appears.
• Only the occupied Program buttons can be
selected.
• If the required Program button is not displayed
on the window, scroll through the list by
touching the [ h ] or [ j ] button.
Touch the Program button for the
2
settings to be changed.
The [Single Page Mode] or [Multi-Page Mode]
window appears.
Proceed to the step 4 if program settings
NOTE
does not need to be changed.
Touch the corresponding field
3
directly for the value to be
changed.
Press the [C] key to clear the current value, and
then enter the desired number.
Repeat this procedure for all values that require
amendment.
Touch the [Clear All] button to clear all values
back to [0].
• Proceed to the step 7 if the program
NOTE
name does not require amendment.
• You can shift the cursor by pressing
the [q] key.
Automatic Sorting into Groups
Ready to Make Master
Select a Program to be Changed
Retrieve P-1
Register P-2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
Ready to Make Master
Select a Program to be Changed
Retrieve P-1
Register P-2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
Enter Print Quantity and Set Number
Cancel
Single Page Mode
Cps. Sets Cps.
1G 20 x 2 4G 50 x
2G 30 x 1 5G 0 x
3G 40 x 2 6G 0 x
P.1/4
A3/Black
Idle
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
OK
Sets
P-1
Rename
1
1 Clear All
1
[Total]
200-
13:59
137