Welcome To The Riso Rp Series Model - Riso RP3700I User Manual

W
elcome to the RISO
RP Series Model
Thank you for purchasing a RISO RP series model, which combines the clear
reproduction of a printing machine with the convenient functions of a copier, keeping
the operation sound as low as possible.
With its large-sized direct-touch-control LCD and dialog messages, this equipment has
been specially designed for simple operation.
About This User's Guide
This guide provides all information necessary to use your RISO RP series model. It is
designed to help you take advantage of the features built into your RISO RP series
model, and provides information on maintenance and troubleshooting.
[Pictorial Guide]
e Original
e Printed copy
Operation Instruction
Describes operation
procedures with simple
numbered steps.
Safety Remark
Gives you safety
instructions under the
following icons:
!
Caution
!
WARNING
Advice Remark
Gives you helpful advice
for trouble-free operation
under the following
heads:
NOTE
Important!
e Functions used in the Copy mode
e Functions used in the Data mode
B
asic Procedure
Turn the power switch ON.
1
The power switch is located on the lower right
side of the machine.
I —
—
NOTE When your RISO Printer is sleeping in
the Energy saving mode, the indicator
on the Wake-Up key lights. In this case,
press the Wake-Up key to wake up your
RISO Printer.
Basic Procedure
p.159
Place an original on the Stage
3 Check the settings on the control
2
Glass or in the optional ADF Unit.
panel.
- If placing originals on the Stage Glass, open
When the power is connected, the Main Display
the Stage Cover and place an original face
and control panel indicators show the initial
down. Position the original according to the
settings.
indicators on the left-hand side of the glass.
Make any necessary changes, such as
Close the cover, resting it gently on the original.
reproduction size and processing mode.
- If placing originals in the optional ADF Unit,
Holding down the Reset key longer than one
open the ADF Original Receiving Tray and
second returns the control panel to the initial
adjust the ADF Original Guides to the width of
settings.
the originals. Then place the originals face
down in the ADF Unit. The originals are
NOTE ¥ When the message "Processing Data"
automatically fed and set into place.
appears on the Main Display, it
indicates that document data have
already been received from the
computer and are being processed in
NOTE A maximum of 50 originals can be set
the system of the machine. In normal
into place on the ADF Tray at one time.
operation, the print job of this document
data will start within a few minutes. If it
is not required to proceed with your
!
Caution
Do not force the cover down
original urgently, wait until this print job
on top of a bound original
finishes.
placed on the Stage Glass.
NOTE When an original is in place, the
process automatically changes to
master-making from printing. The
"Ready to Make Master" message
28
appears in the Main Display.
ON
OFF
WAKE-UP
SLOW SPEED FAST
1 2 3 4 5 PRINT
DATA/COPY Ready to Print Ready to Print Ready to Print Ready to Print POSITION
M M LIGHT DENSITY DARK
Aux. Menu Aux. Menu Print Position Print Position Paper Paper 1 2 3 4 5
PROPERTIES Renew Page Renew Page 10 . 0mm 10 . 0mm 10 . 0mm 10 . 0mm A 3 3 A 3 3
1 2 3 CENTER
Standard Standard Standard Standard
TEST PRINT RESET
Reserved Reserved Fine Fine 4 5 6
D-CHECK>OFF D-CHECK>OFF SORTER>OFF AUTO-GO>OFF SORTER>OFF AUTO-GO>OFF 7 8 9
WAKE-UP A3/Black A3/Black READY READY 13:59 13:59 START STOP
0 C
Expanding Functions with the Document Memory Card
Scanning and Saving Document Data
Documents, books and other originals can be scanned on the printer, and the
scanned data can be stored in the storage memory.
The storage data can be recalled and printed at any time.
In the same way as when printing in the Copy mode, it is possible to enlarge and
reduce page sizes and adjust the scanning contrast when scanning documents in the
Scanning mode.
Touch the [Scan] button on the
Storage File Selection Storage File Selection
1
[Storage File Selection] window.
Select a Storage File Select a Storage File
Leaf RISO
The [File Storage Stage] window appears.
¥ Refer to step 1 in the section Recalling the
Form2 RISO
Storage File (page 39) for details on
Form1 RISO
displaying the [Storage File Selection] window.
S Test RISO
¥ It is also possible to change the file name and
owner s name in this stage if necessary.
Scan Scan
p.50...Renaming the Scanned Data File
A3/Black Blocked
and Its Owner.
29
Touch the [Page Size] button.
Specify the File Properties for Scanning
2
Scanning Mode
The [Page Size Entry] window appears. File Storage Stage
File Name SCAN000001
Owner RISO
Page Size A3
A3/Black Blocked
Touch the Size button for the
Specify the Page Size
3
relevant page size.
Scanning Mode
Page Size Entry
If the required [Size] button is not displayed on
the window, touch the [ h ] or [ j ] button to scroll A3 A4
through the list.
B4 B5
A4 A4 B5
Important!
P.1/1
Select a paper size that matches the enlarged or
reduced page size if you change the
A3/Black Blocked
reproduction ratio in scanning.
44
Panel Highlight
Indicates the key and/or
indicator to be used or
referred to during
operation.
Main Display Frame
Indicates the message
to be displayed in
relation to an instructed
operation.
01/31/00
01/31/00
02/03/00
02/11/00
Free Area: 18MB
(57%)
13:59
Cancel OK
Cross-reference Remark
Rename
Rename
Indicates other sections
Page Siz age Size
13:59
of the User's Guide
where you can find
Cancel OK
Postcard related descriptions.
U-1
13:59
5