Basic Procedure - Riso RP3700I User Manual

Place an original on the Stage
3
Glass or in the optional ADF Unit.
- If placing originals on the Stage Glass, open
the Stage Cover and place an original face
down. Position the original according to the
indicators on the left-hand side of the glass.
Close the cover, resting it gently on the original.
- If placing originals in the optional ADF Unit,
open the ADF Original Receiving Tray and
adjust the ADF Original Guides to the width of
the originals. Then place the originals face
down in the ADF Unit. The originals are
automatically fed and set into place.
A maximum of 50 originals can be set
NOTE
into place on the ADF Tray at one time.
!
Caution
Do not force the cover down
on top of a bound original
placed on the Stage Glass.
NOTE When an original is in place, the
process automatically changes to
master-making from printing. The
"Ready to Make Master" message
appears in the Main Display.

Basic Procedure

29