Erasing A Saved Program Setting - Riso RP3700I User Manual

Erasing a Saved Program Setting

Display the [Program] tab on the
1
sub-panel window and then touch
the [Clear] button.
A message [Select a Program to be Cleared]
appears.
• Only the occupied Program buttons can be
selected.
• If the required Program button is not displayed
on the window, scroll through the list by
touching the [ h ] or [ j ] button.
Touch the Program button to be
2
erased.
The [Single Page Mode] or [Multi-Page Mode]
window appears.
Touch the [Clear] button.
3
The selected program is erased and the window
returns to the [Program] tab.
Touch the [Cancel] button to return to the
[Program] tab without erasing the program.
The name of the corresponding program
NOTE
button will return to the default name.
Automatic Sorting into Groups
Ready to Make Master
Select a Program to be Cleared
Retrieve RISO NEWS
Register P-2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
Ready to Make Master
Select a Program to be Cleared
Retrieve RISO NEWS
Register P-2
Change P-3
Clear
Selections Job List Program
A3/Black
Idle
This program is to be cleared.
Single Page Mode Cancel
Cps. Sets Cps.
1G 10 x 2 4G 50 x
2G 30 x 1 5G 0 x
3G 40 x 1 6G 0 x
P.1/4
A3/Black
Idle
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
P-4
P-5
P-6
P.1/4
Catalog
13:59
M
Clear
Sets
RISO NEWS
Rename
1
Clear All
1
1
[Total]
140-
13:59
139