Repositioning The Print - Riso RP3700I User Manual

R
epositioning
the Print
The print position can be adjusted vertically (up and down)
and horizontalty (to the right and left). The allowable range
is ±10mm (± ⁄ ").
3
8
Print position can be adjusted during printing without
stopping the operation by pressing the Print Position
Adjustment keys (except for the Print Position Center key).
If you adjust the print position, be sure to produce
NOTE
test prints to verify the new print position.
Press the Print Position Adjustment keys.
SPEED
SLOW FAST
1 2 3 4 5
DENSITY
LIGHT DARK
1 2 3 4 5
1 2 3
TEST PRINT RESET
4 5 6
7
8 9
START
STOP
0 C
The print position moves by 0.5mm with each press of the
key. This distance can be changed to 0.25mm by touching
the [Fine] button on the Main-panel window.
When the Print Position Adjustment key is pressed, the
shift distance of the print position and the result of the
adjustment appear in the [Print Position] frame in the Main-
panel window.
Besides, the current print position will be memorized, thus
allowing you to recover it for the print job of the following
original by touching the [Recall] button.
PRINT
POSITION
PRINT
POSITION
CENTER
CENTER
Moves print position down.
Moves print position to the left.
Moves print position up.
Print Position Center key
Returns print position to the center.
Moves print position to the right.
Ready to Print
Aux. Menu
Renew Page
Reserved
A3/Black
Print Position Paper
10. 0mm 10. 0mm
A 3
Standard
Fine
SORTER>OFF AUTO-GO>OFF
13:59
Idle
M
69