Changing Registered Functions - Riso RP3700I User Manual

Changing Registered Functions

Touch the [Choice] frame whose
1
function to be changed in the [Copy
(or Data) -Md-Selections] window.
The function entry window appears for the
selected [Choice] frame.
• Refer to the steps 1 to 3 in the section
[Registering Frequently-Used Functions] on page
117 for the procedures required to display [Copy-
Md-Selections] or [Data-Md-Selections] window.
• If a desired button is not displayed on the
window, touch the [ c ] or [ d ] button to scroll
through the list.
Touch the other function button
2
you want to register.
If a desired button is not displayed on the window,
touch the [ h ] or [ j ] button to scroll through the list.
• Only non-registered functions can be
NOTE
selected in the window. The functions
that cannot be selected will be grayed
out.
• [No Entry] can also be selected. In this
event, the selected option frame will
disappear from the [Selections] tab of
the Sub-panel window.
Recalling Functions Quickly
Properties
Copy-Md-Selections
=
Choice1 Book Shadow Editor
= Side Margin Change
Choice2
= Confidential Mode
Choice3
=
Choice4 Idling Action
A3/Black
Blocked
Properties
Entry-Choice 4 Cancel
Select a Function to be Listed
Semi-Auto (Master) D-Feed Check
Paper Data Entry Stack Guide Adjust
Job Separation Jump Wing Control
P.2/3
A3/Black
Blocked
Close
13:59
OK
13:59
121