Problem
Cards frequently jam in the Paper Feed
Area even if the Paper Feed Pressure
Adjustment Lever is set to "CARD".
Multiple paper feeding occurs.
The back of printed cards is peeling or
separating, or there are wrinkles on
the leading edge of printed copies.
Cause
Decrease the stripper pressure as
shown by the arrow.
= RP3790 / RP3590 =
Besides, change the angle of the
stripper plate by turning the dial in the
direction shown by the arrow.
(except RP3790/3590)
Increase the stripper pressure as
indicated by the arrow.
Besides, change the angle of the
stripper plate by turning the dial in the
direction shown by the arrow.
(except RP3790/3590)
Decrease the stripper pressure as
shown by the arrow.
Troubleshooting Tips
Action
= RP3790 / RP3590 =
= RP3790 / RP3590 =
195