Riso RP3700I User Manual page 145

Touch the [Custom Paper Entry]
3
button.
The main [Custom Paper Entry] window appears.
Touch the [Register] button.
4
A message [Select a Frame for Custom Paper
Size Entry] appears.
Touch a vacant Frame button.
5
Only buttons in which information has not been
registered can be selected. (The occupied buttons
will be shaded out.)
Important!
If there is no vacant Frame button remaining,
delete the unwanted paper size to make room for
the new one.
p.150... Erasing Registered Custom Paper
Sizes
Specify the paper size.
6
Input the paper length and width with the [ c ] [ d ]
buttons or the Print Quantity keys.
• To shift the cursor, press the [q] key or touch
the relevant field directly.
• Press the [C] key to return to the default setting.
• The ranges of the length and width are shown
below the respective fields.
• The name for the current custom paper size is
shown above the [Rename] button. You can
name or rename the paper size.
p.146...Changing Settings and Names of
Custom Paper Sizes
Using Custom Paper
Properties
All Custom Paper Entry
Copy Mode Energy Saving Mode
Data Mode Power-OFF Schedule
System Idling Action
P.7/10
A3/Black
Blocked
Properties
Custom Paper Entry
Select Action
Register
U-1
Change
U-2
Clear
U-3
A3/Black
Blocked
Properties
Custom Paper Entry
Select a Frame for Custom Paper Size Entry
Register
U-1
Change
U-2
Clear
U-3
A3/Black
Blocked
Properties
Cancel
Cutom Paper Entry
126 mm
(90mm~340mm)
186 mm
(140mm~555mm)
A3/Black
Blocked
=
5 mn
= 22:00
= 12 hour
13:59
Close
U-4
U-5
U-6
13:59
Close
U-4
U-5
U-6
13:59
OK
U-1
Rename
13:59
145