Riso RP3700I User Manual page 161

Functions and Descriptions
Serial Com. Speed
Selects the serial communication speed between
the printer and the data receiving device for the
Remote transmission mode.
(Available only for the Remote transmission mode)
AT Command Output
Outputs a selected AT command to the
connected data receiving device (modem or TA).
You can check if your selected data receiving
device can properly communicate with the printer
by transmitting a desired AT command.
For detailed descriptions about the AT
commands, refer to the user's guide of the
selected data receiving devide.
(Available only for the Remote transmission
mode)
Owner Name Entry
Specifies the Owner Name to be automatically
allocated to the data files saved in the Scanning
mode.
<AT Command Selection List>
No. AT command
001 ATB0&W
002 ATB1&W
003 ATL0&W
004 ATL1&W
005 ATL2&W
006 ATL3&W
007 ATM0&W
008 ATM1&W
009 ATM2&W
010 ATM3&W
011 ATY0
012 ATY1
NOTE The 0's in the AT command fields are zeros.
Options
115200bps , 57600bps, 38400bps,
19200bps, 9600bps, 4800bps,
2400bps
See the List below
No. AT command No.
013 AT&B0&W 025
014 AT&B1&W 026
015 AT&B2&W 027
016 AT&D0&W 028
017 AT&D1&W 029
018 AT&D2&W 030
019 AT&D3&W 031
020 AT&F&W 032
021 AT&F0 033
022 AT&F1 034
023 AT&M0&W 035
024 AT&M4&W 036
Customizing the Initial Settings
AT command No. AT command
AT&M5&W 037 AT\N3&W
AT&M6&W 038 AT\N4&W
AT&M7&W 039 AT\N5&W
AT&W0 040 AT%X0&W
AT&W1 041 AT%C0&W
AT&Y0&W 042 AT%C1&W
AT&Y1&W 043 AT%C2&W
AT\J0&W 044 AT%C3&W
AT\J1&W 045 AT&K0&W
AT\N0&W 046 AT&K1&W
AT\N1&W 047 AT&K2&W
AT\N2&W 048 AT&K3&W
Category and Reference
Data Mode
Data Mode
Data Mode
p.51
Customizing the Initial
Owner's Name
161