Riso RP3700I User Manual page 103

Touch the [Jump Wing Control]
3
button.
The [Jump Wing Control] window appears.
Select a desired mode.
4
[Auto] ........ The Jump Wings will be adjusted
automatically according to the printing
paper size. (Default setting)
[Special] ... The Jump Wings will be set at the
specified position.
Select this mode when using the
custom-size paper which requires the
special position of the Jump Wings.
Touch the [OK] button
5
The window returns to the [Functions] window.
Preventing Paper Feed/Ejection Error
Ready to Make Master Ready to Make Master
Functions
Paper Data Entry
Job Separation
D-Feed Check D-Feed Check
A3/Black
Ready to Make Master
Jump Wing Control
"Auto" is recommended
in most cases.
Select another one only
when paper cannot be
ejected well.
A3/Black
Ready to Make Master
Jump Wing Control
"Auto" is recommended
in most cases.
Select another one only
when paper cannot be
ejected well.
A3/Black
M
Close
Stack Guide Adjust
Jump Wing Control Jump Wing Control
Regist. Mark Skip
P.2/3
13:59
Idle
M
Cancel OK
Auto
Special
13:59
Idle
M
Cancel OK
Auto
Special
13:59
Idle
103