Riso RP3700I User Manual page 125

Press the Properties key.
2
The [Current Job Design] window appears.
[Current Job Design] window
You can confirm the current print settings on the
Main Display when the Properties key is pressed.
• Use the [ c ] and [ d ] buttons to scroll through
the display line-by-line.
• The items displayed on the [Current Job
Design] window with the "N" symbol beside
them will be registered in memory. Check the
details of the settings to confirm that the
parameters are set as required. If the
parameters are not correct, close the window
and revise the settings.
• For the items which are not shown on the
window, the default setting will be registered in
memory.
Touch the [Job List Entry] button.
3
The [Job List Entry] window appears.
Touch the Register button.
4
A message [Select a Memory Frame for Current
Print Job] appears over the buttons.
• Only the Memory Frame buttons which are not
occupied with print job settings can be selected.
• If no vacant Memory Frame button is displayed
on the window, scroll through the list by
touching the [ h ] or [ j ] button.
Important!
If no available Memory Frame button exists in the
list or a desired one is occupied, erase a job
setting once and register the new setting in it.
p.129... Erasing a Saved Print Job Setting
Storing Settings in Memory
DATA/COPY
PROPERTIES
PROPERTIES
WAKE UP
Ready to Make Master
Current Job Design
Image Processing Photo
Scanning Contrast Level 1
Reproduction Size 80%
Margin+ x90%
Image Editing ON
Auto Process ON
Sorter Group
Print Quantity 100Sheets
Job List Entry Job List Entry
A3/Black
Idle
Current Job Design
Image Processing Photo
Scanning Contrast Level 1
Reproduction Size 80%
Margin+ x90%
Image Editing ON
Auto Process ON
Sorter Group
Print Quantity 100Sheets
A3/Black
Idle
Ready to Make Master
Job List Entry
Select a Memory Frame for Current Print Job
Register M-1
Rename M-2
Clear M-3
P.1/4
A3/Black
Idle
M
Close
13:59
M
Close
13:59
M
Close
M-4
M-5
M-6
13:59
125