Configurable Functions And Their Options - Riso RP3700I User Manual

Configurable Functions and Their Options

The functions for which the initial settings can be changed are shown below.
The framed option is the default initial setting.
Some functions will not be displayed on the [Properties] window depending on the
printer model and the configuration of optional devices.
In the table below are also indicated the corresponding category buttons to allow quick
search of functions.
p.155... Category buttons
NOTE Initial settings that have been changed will become valid when the
[Properties] window is closed.
Functions and Descriptions
Copy-Md-Selections
Enables frequently used functions to be
registered in the [Selections] tab in Copy mode.
Image Processing
Selects the initial image processing mode.
Scanning Contrast
Selects the initial setting of the original scanning
contrast.
Reproduction Size
Selects the initial reproduction size setting.
Halftone Curve Type
Selects the initial setting for the processing of
photo and halftone images.
Margin-Plus Rate
Specifies the initial Margin Plus Rate.
[MULTIUP] Display
Selects if the [MULTIUP] button should be
displayed in the Main-panel window. Select [ON] to
display the button.
Data-Md-Selections
Enables frequently used functions to be registered
in the [Selections] tab in the Data mode.
Customizing the Initial Settings
Options
Line , Duo, Photo
Auto ,
Manual (Level 1, Level 2, Level 3,
Level 4, Level 5)
1-to-1 , Auto
Highlight: 1 (lighter), 2 (standard) ,
3 (darker)
Shadow: 1 (lighter), 2 (standard) ,
3 (darker)
90 to 99%
Default: 95%
ON, OFF
Category and Reference
Copy Mode
p.117
Recalling Functions
Quickly
Copy Mode
p.56
Photo/Half-Tone
Processing
Copy Mode
p.64
Changing Image
Contrast on Prints
Copy Mode
p.59
Reducing and
Enlarging Originals
Copy Mode
p.110
Producing Enhanced
Photo Images
Copy Mode
p.59
Reducing and
Enlarging Originals
Copy Mode
p.86
Printing Originals
Side by Side
Data Mode
p.117
Recalling Functions
Quickly
157