Renewing Masters - Riso RP3700I User Manual

R
enewing Masters
You can renew (remake) a master from the most recently scanned/developed page data.
Besides, the Image rotation feature is selectable in the Data mode.
Important!
• The [Renew Page] function is not available in the following cases.
- After turning on the Main Power switch or pressing the Reset key.
- After the confidential operation.
- After Multi-up printing.
- After printing out the optional Key/Card counter's volume check sheet.
- When an error occurs before the master-making operation completes.
• If the [Renew Page] button is not displayed on the Main-panel window, activate the
[[Renew Pg] Display] function on the [Properties] window.
• The [Renew Page] function can also be activated on the [Functions] window.
Touch the [Renew Page] button on
1
the Main-panel window.
The instruction message box appears.
Touch the [Cancel] button to cancel this operation.
In the Data mode, touch the [Rotate] button to
rotate the image by 180 degrees, if necessary.
To cancel this function, touch the button again.
Press the Start key.
2
Ready to Print
Local Page No. 1
Aux. Menu Print Position
00. 0mm 00. 0mm
Renew Page
Skip Page
Clear All
Fine
Reserved
SORTER>OFF AUTO-GO>OFF
A3/Black
Idle
Master Renewal Mode
Local Page No. 1
Press Start Key
Cancel
A3/Black
Idle
Main-panel
Aux. Menu
M
Paper
A 3
Standard
13:59
Rotate
13:59
83