Riso RP3700I User Manual page 159

Functions and Descriptions
Fine Adjust Mode
Selects the initial status of the fine adjustment mode
of the print position. The print position will be
adjusted in increments of 0.25mm with a press of the
Print Position Adjustment key when [ON] is selected.
Custom Paper Entry
Registers custom paper sizes to allow you to
select them for the printing paper data.
Energy Saving Mode
Selects if energy is required to be saved or not,
while your printer is idle.
Two modes, [Auto Power-off] and [Auto Sleep],
are available to save energy.
If [Auto Power-off] is selected, the power will be
turned off automatically when your printer
remains idle for a specified period.
If [Auto Sleep] is selected, the power supply will
be shut off only for the control panel under the
same condition, thus allowing your printer to
receive data even in the energy saving mode.
You can also select the waiting period required
to lead your printer into the energy saving mode.
Power-OFF schedule
Selects if the power supply to the printer should
be shut off at a specified time (any time on a 24-
hour clock basis).
However, the printer will not be shut off at the
specified time if the printer is used (including
externally-connected equipment) or data file is
transmitted from an external source.
Auto Idling Action
Selects if the Auto Idling feature should be
activated or not. The waiting interval and the
times of action can also be specified.
Volume Alarm Cue
Selects the timing for displaying the [!Volume!]
button.
Minimum Print Q'ty
Selects the minimum print quantity which should
be produced from one master.
Customizing the Initial Settings
Options
ON, OFF
Auto-Sleep , Auto Power-Off, OFF
<Waiting Time> 1 to 60 minutes
5 minutes (Default)
ON , OFF
<Power-off Time>
(Not specified)
ON , OFF
<Interval> 1 to 12 hours
12 hours (Default)
<Times> Once to three times
Once (Default)
Earlier, Standard , Later
1 to 99 (copies)
Category and Reference
System
p.69
Repositioning the
Print
System
p.144
Registering
Nonstandard Paper
System
System
System
p.80
Idling Action
System
p.164
Checking Remaining
Amounts of
Consumables
System
159