Riso RP3700I User Manual page 190

Advisory Messages
Message
!!The Data Storage Area
has Become Full!!
Clear Old Storage Data
!!The Image Resolution
of the Current Data has
Just been Converted!!
(Continue--- >START Key)
The properties cannot
be changed during
data processing.
!!Unmatched Size ——
Current Page and
Printing Paper!!
Check Paper Size
(Continue--- >START Key)
!!Unmatched Size ——
Printed Copies and
Printing Paper!!
Remove Printed Copies
(Continue--- >START Key)
!!Unmatched Size ——
Print Cylinder (Drum) and
Image Area!!
Check Print Cylinder (Drum)
(Continue--- >START Key)
190
Description
There is no space left in the
storage memory.
The resolution of the
document data is not suitable
for the print resolution of the
printer.
The document data
transmitted from the personal
computer is being processed.
The page size of the current
print data does not match with
the size of printing paper.
The sizes of the printed
copies remaining in the Auto-
control Stacking Tray and the
paper on the Paper Feed
Tray do not match.
The size of the image area
and the size of the Print
Cylinder (Drum) do not
match.
Action
Erase unwanted storage data to
receive next data.
To continue operation, touch the
[Close] button or press the Reset key.
• To continue printing:
Press the Start key.
• To cancel printing:
- Touch the [Cancel] button.
- Press the Stop or Reset key.
Touch the [Close] button, and Wait
until the document data being
processed is printed.
Replace the existing printing paper with
the corresponding one.
• To continue printing:
Press the Start key.
• To cancel printing:
- Touch the [Cancel] button.
- Press the Stop key or Reset key.
Remove the paper from the Auto-
control Stacking Tray.
• To continue printing:
Press the Start key.
• To cancel printing:
- Touch the [Cancel] button.
- Press the Stop key or Reset key.
Adjust the image area size or use the
Print Cylinder (Drum) of the appropriate
size.
• To continue printing:
Press the Start key.
• To cancel printing:
- Touch the [Cancel] button.
- Press the Stop key or Reset key.