Riso RP3700I User Manual page 172

Changing Print Color
Pull out the Print Cylinder (Drum).
3
Grasp the Print Cylinder (Drum) Handle and pull
out the Print Cylinder (Drum) until it stops.
Remove the Print Cylinder (Drum)
4
from the unit.
Lift the Print Cylinder (Drum) with both hands to
remove it.
Important!
There is ink on the master wrapped around the
Print Cylinder (Drum). Keep your hands and
clothing away from it.
If your hands come into contact with ink, wash
thoroughly.
Load another color Print Cylinder
5
(Drum) onto the holder.
Place another Print Cylinder (Drum) on the
holder horizontally.
Slide the Print Cylinder (Drum)
6
into the unit.
Holding the Print Cylinder (Drum) Handle, slide
the Print Cylinder (Drum) into the unit until it
stops. Then lower the handle.
172