Basic Interface Operation - Riso RP3700I User Manual

Send the document data to the
3
printer.
Using the dedicated printer driver or the
communication utility software, send your selected
document file from the computer to the printer.
The printer processes the received document
data according to the current mode configuration
and the print conditions specified on the
computer. If required, operate the control panel
of the printer to finish your print job.
To interrupt operation, press the Stop
NOTE
key.
For detailed descriptions about the operation with
the computer, consult the user's guides included
in the accessory software CD-ROM or those of
the related software.
NOTE
The dedicated printer driver program,
which is included in the accessory
software CD-ROM, is required to be
installed in the computer in advance.
You can change the print job flow specified when
the current document data are sent to the printer
according to the current print job requirements.
[Renew Page] button
Cancels the print job of the current page and
starts to make another master for the current
page.
[Skip Page] button
Cancels the print job of the current page and
starts to make a master for the following page.
[Clear All] button
Cancels the total print job of the multiple pages
specified for the current document data.

Basic Interface Operation

Display transition pattern for the full automatic
process operation in the Local connection
mode.
Processing Data
Local
A3/Black
Idle
Ready to Make Master
Local Page No. 1
˚Document 1
Owner: RISO
Page Count: 10Page
Receipt Time 09/31/00 15:30
Page Size: A 4 (210X297)
Skip Page Clear All
SORTER>OFF AUTO-GO>OFF
A3/Black
Idle
Ready to Print
Local Page No.1
Aux.Menu Print Position
10. 0mm 10. 0mm
Renew Page
Skip Page
Clear All
Fine
Reserved
SORTER>OFF AUTO-GO>OFF
A3/Black Idle
M
13:59
M
Paper
A 4
Standard
13:59
M
Paper
A 4
Standard
13:59
35