Automatic Printing (Auto Process) - Riso RP3700I User Manual

A
utomatic Printing
(Auto Process)
If you do not need to check print samples before making
prints, touch the [AUTO-GO] button before pressing the
Start key to activate the Auto Process feature.
This feature enables nonstop operation from master-
making through printing.
If you need to check or adjust the print position,
NOTE
cancel the Auto Process feature by touching the
[AUTO-GO] button again or activate the [Semi-
Auto(Master)] feature in the [Properties] window.
p.114... Changing Process Flow on the
Printer
Touch the [AUTO-GO] button on the
Main-panel window.
AUTO-GO>OFF
If the Auto Process feature is adjusted to be
NOTE
activated as initial status in the [Properties]
window, the Auto Process feature will always be
activated even after the printer is reset or
restarted.
p.154... Customizing the Initial Settings
AUTO-GO>ON
Ready to Make Master
Image Size Contrast
Line 100% Auto
Duo Auto Manual
Photo Options
Advanced
MULTIUP>OFF SORTER>OFF AUTO-GO>OFF
A3/Black
Idle
Main-panel
AUTO-GO
M
Paper
A 3
Standard
13:59
71