Setting up Semi-Auto Process
Display the [Catalog] tab on the
1
sub-panel window and then touch
the [Functions] button.
The [Functions] window appears.
Touch the [Semi-Auto (Master)] or
2
[Semi-Auto (Print)] button.
[Semi-Auto (Master)]
Automatically starts master-making operation for
the next original (page data) after previous printing
has finished. After the master-making and test-
printing, the print job is suspended.
[Semi-Auto (Print)]
Automatically starts printing operation after
master-making operation. After the printing of the
current page, the print job is suspended.
• Touch the corresponding button again to cancel
NOTE
the respective functions.
• The [Semi-Auto (Master)] and [Semi-Auto (Print)]
functions cannot be selected together.
Important!
Even if you specify the process flow on the printer, the
current setting will be neglected when the next document
data is transmitted with another process flow setting.
Changing Process Flow on the Printer
Ready to Make Master
Local
Page No. 1
A desired function can be
selected from the list.
The properties of your RISO
printer can be changed.
Selections
Job List
A3/Black
Ready to Make Master
Local
Page No. 1
Functions
Confidential Mode
Renew Page
Idling Action
A3/Black
M
Functions
Properties
Program
Catalog
13:59
Idle
M
Close
Rotate
Semi-Auto (Master)
Semi-Auto (Print)
P.1/2
13:59
Idle
115