Riso RP3700I User Manual page 24

Preparing to Print
Raise and slide the Paper Stop to
4
fit paper length.
Set the Paper Stopper Cushion.
5
Position the Paper Stopper Cushion Knob at
either "NORMAL" or "CARD", according to the
paper to be used.
• NORMAL
• CARD
Auto-control Stacking Tray (Optional for RP3700, RP3500 and RP3100)
You can take the printed copies out of the Auto-control
Stacking Tray smoothly by pressing the button on the
side of the tray.
When the button is pressed, the Paper Stop retreats to
allow you to take the prints.
When no paper is placed there in the same case, on
the other hand, the Paper Guides and the Paper Stop
will return to the initial position for storage.
24
Standard paper
Thick paper such as card stock
NORMAL
CARD