Riso RP3700I User Manual page 168

Replacing the Master Roll
Remove both left and right
5
flanges.
Remove both left and right flanges from the
depleted Master Roll.
NOTE
Attach the existing flanges to a
6
new Master Roll.
Unpack a new Master Roll.
Attach the flanges removed from the depleted
Master Roll to the new one, with the colored flange
to the right end and the white one to the left end.
Then unwrap the new Master Roll.
Install the new Master Roll.
7
Insert the Master Roll into the supporter, placing
the colored flange on the right-hand flange holder.
Insert the leading edge of the
8
Master Roll into the Master
Entrance.
Unroll the Master Roll by pulling on the leading
edge, and insert the edge under the green film
until it stops.
Then take the slack winding the Master Roll.
168
Save the flanges for the replacement
roll.
Colored Flange
White Flange