Safety Guides - Installation; Installation - Riso RP3700I User Manual

S
afety Guides

-Installation

This section explains the precautions you have to observe when installing your RISO Printer.
Read this section before installing your RISO Printer.
NOTE Your dealer will help you to determine a proper location for your unit at the time of delivery.
Installation
!
WARNING
• Do not place water containers or metallic objects on the unit. If water drips inside the unit or a
metallic object drops inside it, it can result in a fire or an electric shock.
!
Caution
• Install the unit near the electrical outlet to avoid using an extension cord between the unit and
the electrical outlet.
If an extension cord is unavoidable, do not use one longer than 15 ft. (5 m).
• Place the unit on a flat and stable surface (maximum of 3/8 inches (10 mm) differential
allowed). Injury might occur if the unit falls.
• Do not place heavy objects on the unit. The objects might fall and cause injury.
• Keep the unit away from dusty or humid areas. Otherwise, a fire or an electric shock might
occur.
• Unplug the power cord before moving the unit. Otherwise, the power cord might be damaged
and a fire or an electric shock might occur.
Important!
• Avoid installing your RISO Printer in the locations listed below. Failure to observe this
precaution may lead to machine failure or human injury.
- Extremely bright locations such as locations close to windows or locations that are exposed
to direct sunlight (provide a curtain if you have no choice but to install your RISO Printer in
such a location)
- Locations that are subject to sudden temperature change
- Extremely hot and humid locations or cold and dry locations
- Heated locations
- Locations exposed to direct cold air, direct hot air, or direct radiant heat
- Badly ventilated locations
- Locations where it is impossible to provide a clearance of 4 inches (10 cm) or wider behind
your RISO Printer
8