Changing Printing Paper Information - Riso RP3700I User Manual

C
hanging Printing
Paper Information
For trouble-free printing, change the following information of the printing
paper to be used when different type/size of paper has been loaded.
[Size]
Select the size of the printing paper to be used.
[Type]
Select the type of the printing paper to be used. (The Paper Feed Pressure
Adjustment lever must also be adjusted when the paper type has been
changed.)
[Finish]
Select the type of finish of the printing paper, whose information will be
displayed on the PC monitor in the Data mode with use of the utility
software RISO-MONITOR.
When paper with a different size to the previous one has been set in
NOTE
place, the [Paper Stock Change] window will be displayed to enable
you to change the setting. On the other hand, when a different type
of paper with the same size is set, modify the setting by yourself on
the [Paper Data Entry] window.
Display the [Catalog] tab on the
1
sub-panel window and then touch
the [Functions] button.
The [Functions] window appears.
Display the [Paper Data Entry]
2
button.
Touch the [ h ] or [ g ] button to display this function
button.
The number of function buttons will differ
NOTE
depending on the printer model and the
configuration of the optional devices.
Ready to Make Master
Local Page No. 1
A desired function can be
selected from the list
The properties of your RISO
printer can be changed
Selections Job List Program
A3/Black
Idle
Ready to Make Master
Functions
Paper Data Entry
Stack Guide Adjust
Job Separation
Jump Wing Control
D-Feed Check Regist. Mark Skip
P.2/3
A3/Black
Idle
Sub-panel
Catalog
M
Functions
Properties
Catalog
13:59
M
Close
13:59
97