Changing Print Job Flow - Riso RP3700I User Manual

C
hanging Print Job Flow
You can change the Print job flow specified when the current document data was sent to the
printer according to the current print job requirements.
The following job flows are available for the current print job in the Data mode.
[Renew Page]
Cancels the print job of the current page and starts to make another master for the current page.
[Skip Page]
Cancels the print job of the current page and starts to make a master for the following page.
[Clear All]
Cancels the total print job of the multiple pages specified for the current document data.
Important!
This feature is available only when [Full auto process] or [Semi-Auto
(Master)] is not selected as process flow with the printer driver.
The print job flow can be changed in both process modes,
"master-making" and "printing".
74
Main-panel window (Master-making)
Ready to Make Master
Local Page No. 1
˚Document1
Owner RISO
Page Count 10Page
Receipt Time 09/31/00 15:30
Page Size A 4 (210X297)
Skip Page Clear All
SORTER>OFF AUTO-GO>OFF
A3/Black
Idle
Main-panel window (Printing)
Ready to Print
Local Page No. 1
Aux. Menu Print Position
10. 0mm 10. 0mm
Renew Page
Skip Page
Clear All
Reserved Fine
D-CHECK>OFF SORTER>OFF AUTO-GO>OFF
A3/Black
Idle
Main-panel
Aux. Menu
M
Paper
A 4
Standard
13:59
M
Paper
A 3
Standard
13:59