Riso RP3700I User Manual page 191

Warning Messages in the Message Area
Message
!A Wrong Print Cylinder (Drum) Type
has been Selected!
Select Another Print Cylinder (Drum)
Type or Replace
the Current Print Cylinder (Drum)
Enter Print Quantity Over [##],
Programed Minimum Value
Place Another Original and Press Start
Key
To Cancel, Press Stop Key
Place Another Original
To Cancel, Press Stop Key
!!The Print Cylinder (Drum) Type has been
Changed!!
Select the Current Print Drum Type
Description
The type of the Print Cylinder
(Drum) selected on the Main
Display differs from the one
actually installed.
The entered print quantity is
less than the minimum print
quantity setting.
The printer is ready to scan
the next original on the Stage
Glass in Programed printing
or in Multi-up printing.
The printer is ready to scan
the next original on the ADF
Unit (optional) in Multi-up
printing.
Advisory Messages
Action
Change the Print Cylinder (Drum) or
select the correct type on the Main
Display.
p.171... Changing Print Cylinders
(Drums)
Enter the print quantity not less than
the minimum print quantity.
p.154... Customizing the Initial
Settings
Set the next original on the Stage
Glass or in the ADF Unit (optional) and
then press the Start key.
To cancel printing, press the Stop key.
Set the next original in the ADF Unit.
To cancel printing, press the Stop key.
p.171... Changing Print Cylinders
(Drums)
191