Skipping The Registration Mark - Riso RP3700I User Manual

S
kipping
the Registration Mark
You can specify the scanning start point between 0mm and
99mm (approx. 0" and
feature enables you to skip the registration marks* on the
original and print on the finish-sized paper without any of
these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on
paper that is larger than the finished size and then cut
down to the finished size afterwards. The symbol that
indicates the position to cut in this event is known as the
registration mark.
Important!
• When enlargement or reduction is performed, the image
reproduction is made after skipping the registration
mark.
• Multi-Up printing is not available when the [Regist. Mark
Skip] function is activated.
p.86... Printing Originals Side by Side
Display the [Catalog] tab on the
1
sub-panel window and then touch
the [Functions] button.
The [Functions] window appears.
Display the [Regist. Mark Skip]
2
button.
Touch the [ h ] or [ j ] button to display this function
button.
NOTE
106
⁄ ") from the top of an original. This
3
8
The number of function buttons will differ
depending on the printer model and the
configuration of the optional devices.
Ready to Make Master
Local Page No. 1
A desired function can be
selected from the list
The properties of your RISO
printer can be changed
Selections Job List Program
A3/Black
Idle
Ready to Make Master
Functions
Paper Data Entry
Stack Guide Adjust
Job Separation
Jump Wing Control
D-Feed Check Regist. Mark Skip
P.2/3
A3/Black
Idle
Sub-panel
Catalog
M
Functions
Properties
Catalog
13:59
M
Close
13:59