2-Color Printing With 1 Original [Easy 2Color]; Easy 2Color Types - Riso MZ790U Instruction Manual

Basic Operations
2-Color Printing with 1 Original
One original is scanned, is divided into Cylinder (Drum) 1 and Cylinder (Drum) 2, and a dual-color print is made.
Important!:
• Use paper that is 7

Easy 2Color Types

There are two ways of separating colors for "Easy 2Color".
Separating by contrast of the original
!
In this separation method, the dark and light sections of the original are automatically detected.
You can use 3 functions with this method: "Red Color", "Hand Writing--1, and "Hand Writing--2".
Separating by specified area
!
Draw around the part of the original that you want to separate by using a recommended pen.
You can use 2 functions with this method: "Specified Area" and "Separation Sheet".
This function cannot be used with the following functions.
• Multi-Up Print
• Size (enlargement/reduction)
• Stamp
• OneSide MasterMake
• Printing from a computer data
• 2 Up
• Book Shadow
• Auto-Link function
Important!:
• If you use "Red Color", "Hand Writing--1" or "Hand Writing--2", "Contrast" is set to "Auto" and "Image" is set to
"Line".
• If you use "Specified Area" or "Separation Sheet", adjust the "Contrast".
• If you use "Specified Area", place the original on the stage glass.
44

2-Color Printing with 1 Original [Easy 2Color]

Original
" × 10 " (182 mm × 257 mm) (B5) or larger.
/ /
3 1
16 8
[Easy 2Color]
Print Result