Setting A Conversion Factor; Toggle Between The Calculated Value And Gross Value; Mixing A Formula With Factor Calculation - Sartorius PMA.Vision VIS1Y EU Series Operating Instructions Manual

0
Max. 7500 g d=0.1 g
249.2
G
+
Factor
1.00
Conversion factor
Please adjust conversion factor.
1.00
1 2 2
0
Max. 7500 g d=0.1 g
200.2
1
Res
+
0
Max. 7500 g d=0.1 g
100.1
1
G
+
Main job information
2nd job information
Mixing w/o job
6.4.1

Setting a Conversion Factor

Select the factor (1) in the weighing display.
t
The [Conversion factor] menu opens.
y
g
1
START
Use the keys (2) to adjust the conversion factor gradually.
t
− Under 1.0: Interval 0.01 (up to 0.10)
− Over 1.0: Interval 0.1 (up to 6.00)
Alternatively, enter the conversion factor directly (3).
t
Select l to confirm (4).
t
Select p (1) to cancel the entry.
t
3 4
6.4.2

Toggle between the Calculated Value and Gross Value

The figure shows the display of the calculated value (1).
Select [Res] (1) in order to display the gross value.
t
F 0.50
o
Factor
START
0.50
The figure shows the display of the gross value [G] (1).
Select [G] (1) in order to display the calculated value.
t
F 0.50
g
Factor
START
0.50
6.4.3

Mixing a Formula with Factor Calculation

The factor calculation enables you to weigh in amounts that are smaller or larger
than that of your basic formula for a specific paint color (e.g., 250 ml of a 1 l
formula). The conversion factor can be set between 0.1 and 6.0.
Select the [Mixing w/o job] button in the Sartorius menu (1).
t
The [Weighing] application appears.
y
1
Operation
VIS1Y
Operating Instructions 29