Configuring The Balance/ Scale; Setting The Parameters (Menu Codes) - Sartorius BL310 Instruction Manual

Configuring the Balance/ Scale

Setting the Parameters (Menu Codes)

Y ou can configure your Basic
rements by selecting from the parameters available in the menu.
Example: Adapt the balance/ scale to unstable ambient conditions:
Menu code 1 1 4
Step
1. T urn off the balance/ scale
2. T urn the balance/ scale back on; e
while all segments
are displayed:
$ T o navigate within a menu
level; the last menu option is
followed by the first option
1.
3. Select the 2nd menu level
4. Select the 3rd menu level
5. In Menu L evel 3:
Select the desired option
6. Confirm new setting;
the o indicates the currently set p
option
$ Select the next menu level
(here: move from the 3rd to
the 1st level)
$ Set other menu codes, if desired p
7. Store parameter settings
and exit operating menu
or
$ Exit operating menu without
storing changes
> R estart the application
18
lite lite
balance or Gem scale to meet individual requi-
Key (or instruction) Display
e
t briefly
t
repeatedly
p
p
t
repeatedly
for 2 sec.
p
, t
t
for 2 sec.
e
1.
2.
...
9.
1. 1.
1. 1. 2
o
1. 1. 4
1. 1. 4
o
1.
0.0
g