Setting the Parameters (Menu Codes)
Example: Adapting the balance/scale to "very unstable" ambient conditions
(menu code 1 1 4).
Step
1. Turn off the balance/scale.
2. Turn on the balance/scale and
while all segments
are displayed:
$ Scroll upward within a
menu level; after the last
menu code, the first
code is displayed again.
3. Select the second level
(scroll to the right).
4. Select the third level
(scroll to the right).
rd
5. 3
menu level:
Scroll until the desired
number is shown.
6. Confirm change; "o"
on display indicates
active setting
$ Return to higher menu level
rd
(from the 3
level).
$ Set other codes as desired.
7. Store settings and exit
the menu
or
$ Exit menu without storing
changes.
> Restart application.
24
Key (or instruction)
e
e
t briefly
q
repeatedly
p
p
q
repeatedly
t
p
p, q
Press and
hold t (2 sec.)
e
Display
1
2
...
9
1
1 1
1 1 2
o
1 1 4
1 1 4
o
1
0.0
g