Product Data Memory - Sartorius la series Operating Instructions Manual

Product Data Memory

Purpose
With this function you can enter,
store and load data records
for initialization of applications,
including user-defined data.
You can use this extra function in
combination with a program from
Application 1 (e.g., counting,
weighing in percent), one from
Application 2 (checkweighing,
time-controlled functions) and the
other extra functions for F4 and F5
(identification codes, 2nd tare
memory).
Available Features
– Store up to 300 data records.
– Data records can be created,
stored or deleted individually.
– Press the soft key to
ProDat
display product data.
– Define a name for each data
record of up to 15 alphanumeric
characters.
– Optional configuration in the
Setup menu to delete a single
character when entering a data
record name by pressing c.
Basic settings: Keypad: CF
function for input: Delete last
character.
– Data records are displayed in
alphabetical order.
– Initialization data set for an
application (such as wRef, nRef)
is saved when you select the Store
option. With several applications
and extra functions active, you
can select the desired parameters
before saving the data to define
initialization data.
– Use the alphanumeric keypad to
search for and display individual
data records.
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5.
– Error messages are displayed in
the text line in plain English.
– Press the soft key to
Delete
delete a data record.
Data Battery-Backed Data Memory
When the balance is disconnected
from AC power, these balance-
generated data will remain stored for
approx. three months. In the standby
mode, data are retained by the
power supply.
Operating the Balance
Factory Settings
No user-definable parameters.
Soft Key Functions
Toggle to product data
ProDat
display
Delete selected data
Delete
record
Overwrite the initialization
Load
data with the selected
data record
Change the data in the
Change
stored data record
Store the initialization
Store
data of the selected
application under the
chosen data record name.
If data already exist for
this data record, a prompt
asks whether this data
should be overwritten.
Answer no to cancel
No
a "delete" or "overwrite"
operation
Answer yes to perform
Yes
the "delete" or "overwrite"
operation
Create a new data record
New
(after entering a data
record name) and
selecting an application,
if desired).
105