Data.out."/"Com. Sbi" Menu - Sartorius Gold & Carat II Series Operating Instructions Manual

Parameter Setting values
KEYS UNLOCK.*
LOCKED
EXT.KEY PRINT
CAL.
CF
ENTER
ZERO
TARE
GLP END
NO*
ON MODE ON/STDB.*
ON/OFF
AUTO ON
LIGHT OFF
ON*
* Factory setting
7.3.6

"DATA.OUT."/"COM. SBI" Menu

Parameter Setting values
COM. OUTP. IND.NO*
IND.AFTR
AUTO.W/O
AUTO W/
STOP.AUT. OFF*
ON
AUTO.CYC. EACH.VAL*
AFTER 2
INTERV.
FORMAT 22CHARS*
16CHARS
EXTR.LIN.
* Factory setting
Explanation
Deactivates the button lock.
Activates the button lock.
Assigns the print function to the external key.
Assigns the calibration and adjustment function selected under [CAL./ADJ.]
to the external key.
Assigns the [Back] function to the external key.
Assigns the [Confirm] function to the external key.
Assigns the [Zero] function to the external key.
Assigns the [Tare] function to the external key.
Assigns the [GLP] function to the external key.
No function is assigned to the external key.
The [On/Off] button switches between on | standby with time.
The [On/Off] button switches between on | standby without time.
Changes the function of the [On/Off] button: The device no longer switches
off or to standby mode, instead it starts a boot process.
Deactivates the lighting on the operating display.
Activates the lighting on the operating display.
Explanations
Activates the manual data output without stability.
Activates the manual data output after stability.
Activates the automatic data output without stability.
Activates the automatic data output after stability.
Deactivates the option to abort the automatic data output.
The automatic data output is aborted by pressing the [Print] button or a soft-
ware command.
Starts the automatic data output with a cycle after each value.
Starts the automatic data output with a cycle after every 2nd value.
The output rate can be set from 0 - 9999 seconds under "INPUT/INTERV.".
The data output provides 22 characters per line (16 characters for the mea-
sured value and 6 characters for identifiers).
The data output provides 16 characters per line for the measured value.
The data output provides an additional line with the date, time, and weight
value.
System Settings
Operating Instructions Gold&Carat II Line 21